Translate This Site

Deep Tillage Sweeps

Formed from high grade steel and heat-treated for extra toughness, our deep tillage sweeps are made to withstand long hours of hard work. Our top of the line products include Swing-Wing flanges that will increase wing strength by 30%, allowing for less wing breakage and more sweep usage. Designed, tested and manufactured on the prairies, McKay deep tillage sweeps have long been established as the farmer’s first choice in tillage tools. 

Chart Display Options:

Dart

The Dart is a specific engineered raised section along the centerline of the sweep. The special concave center wears least, allowing the sweep to retain its sharpness throughout its working life.

The regular crown height is XX” inches.

50° 43° 47°
14 6mm 516 8mm 14 6mm 516 8mm 14 6mm
8 200mm
10 250mm
12 300mm
14 350mm
16 400mm
18 450mm

*The 50° and 47° have 2 14” hole centers, while the 43° have 2 14 – 2 12” slotted hole centers. All the above take 12” bolts.

The Dart is a specially engineered raised section along the center line of the sweep. The special concave center wears least, allowing the sweep to retain its sharpness throughout its working life.

The low-crown sweep has a YY” crown, enabling the same excellent weed cutting solution at a shallower depth.

50°
14 6mm
7 175mm
10 250mm
12 300mm
14 350mm
16 400mm
18 450mm

*The 50° and 47° have 2 1/4” hole centers, while the 43° have 2 14” – 2 12” slotted hole centers. All the above take 12” bolts.

The Dart is a specially engineered raised section along the center line of the sweep. The special concave center wears least, allowing the sweep to retain its sharpness throughout its working life.

Parallel wing sweeps maintain their original cutting width over the working life of the sweep.

50° 43°
14 6mm 516 8mm 14 6mm
8 200mm
12 300mm F F
14 350mm
16 400mm
18 450mm

*The 50° and 47° have 2 1/4” hole centers, while the 43° have 2 1/4”-2 1/2” slotted hole centers. All the above take 1/2” bolts.

Plain

The Plain sweep is preferred for harder soils.

The regular crown height is XX” inches.

50° 43° 47°
14 6mm 516 8mm 14 6mm 516 8mm 14 6mm 516 8mm
6 150mm
8 200mm
10 250mm
12 300mm
14 350mm
16 400mm
18 450mm

*The 50° and 47° have 2 14” hole centers, while the 43° have 2 14” – 2 12” slotted hole centers. All the above take 12” bolts.

The Plain sweep is preferred for harder soils.

Parallel wing sweeps maintain their original cutting width over the working life of the sweep.

50° 43° 47°
1/4 6mm 5/16 8mm 1/4 6mm 1/4 6mm
12 300m F F
14 350mm
16 400mm
18 450mm

*The 50° and 47° have 2 14” hole centers, while the 43° have 2 14 – 2 14=2” slotted hole centers. All the above take 12” bolts.

Penetrator

Penetrator sweeps have 70% of the cutting blade at an increased angle, resulting in a lower load requirement (35%-55%) to penetrate the ground. This patented feature is particularly suited to hard, dry soil.

50° 43°
14 6mm 516 8mm 14 6mm 516 8mm
6 150mm
8 200mm
10 250mm
12 300mm
14 350mm
16 400mm
18 450mm

*The 50° and 47° have 2 14” hole centers, while the 43° have 2 14” – 2 14” slotted hole centers. All the above take 12” bolts.

Penetrator sweeps have 70% of the cutting blade at an increased angle, resulting in a lower load requirement (35%-55%) to penetrate the ground. This patented feature is particularly suited to hard, dry soil.

50° 43°
14 6mm 516 8mm 14 6mm
8 200mm
10″ 250mm
300mm 12″
14 350mm
16 400mm

*The 50° and 47° have 2 14” hole centers, while the 43° have 2 14” – 2 12” slotted hole centers. All the above take 12” bolts.